**Contact a professional**

Ask a help from the parents or teacher is quite common. But, they do not have enough time to involve in your project completely. So, each student needs someone who can help them properly and provide them all information regarding their project. Not only that, as they have enough experience in a specific subject, so they can guide a student with their excellent ideas for a project.

**How to choose a professional**

Now, to get desired result for your assignment, it is easy to hire someone who has enough experience about that subject. One can ask is this service reliable enough? Then, the answer is one should check the credibility of that team before spending money on them.

While it comes to the matter of Assignment Help Online, then you can get thousand search results on web world. But, choose them properly by checking their past records. You should find some feed backs of their previous clients on their official website.

Once, a student chooses a professional help for their assignment, and then it is easy to complete their assignment within the given time. Before, selecting someone, one can take a look in “Why someone is looking for Online Assignment Help” to understand this service closely. Assignment Help Online is now easily available to every student. They just need to choose a proper one for their own project.

]]>Do not think about the quality of these educational centers. Highly skilled and educated professionals are hired after various levels of screening. You only have to send them your homework and they will make it done for you within the time limit. Professionals from homework help online keep on following up with you at every specified hour. They even explain your child where they feel it is important for them to know.

A child just after coming back from school runs to attend tuition classes, just after returning from classes he sits for project completion. Do not you think “all work and no play make jack a dull boy”? You need to understand a person cannot excel in everything at a time. Every individual is different, their likings are different. If you try to make your child outstanding in every field the outcome would be “jack of all trades, master of none”.

For a basic understanding of a person’s strength, weakness, interest and disliking, your child should be given ample time. Discovering oneself is not that easy. Homework help online makes your job easier and that too at a very average cost. Surprising but true. Instead of spending thousands on tuition classes gift your child the pleasure of studying online. They for sure would love the whole experience.

]]>However, this is a costly alternative and is hence out of reach for many. Biology Homework Help therefore is very important for students who find it difficult to cope up with the subject. Even though certain chapters may seem easy, there are quite a few difficult chapters which need professional help.

Therefore, if your child finds it difficult to cope up with the subject, help him with his homework. However, sometimes parents fail to help their wards with their homework. In such cases, it is important to consult with experts regarding help.

Various experts providing Biology Assignment help can be hired to help with school work. They provide cheaper service than tuition centers, although they are not in charge of explaining the subject to your ward. They simply complete assignments and tasks, so that you do not have to do it.

It is quite interesting considering last minute services that they provide. Hence, if you need help regarding topics at the last minute, appoint professionals to help you out. Looking for talented operatives is quite a task, even though various online agencies provide reputed service for a price.

You could ask around for professionals, as other parents could provide important information too. Decent operatives providing Biology Homework Help are in great demand. Hence, you should look at online forums and advertisements for help.

]]>The cost decrease was overstated during the economic downturn, as customers maintained to put off electronics purchases until the economic system turned itself around. The requirement for Electrical Engineering Assignment Help fall worked its way up the supply sequence, causing semiconductor costs to fall more quickly during the economic downturn, before reducing once the economic system and pc requirement retrieved.

The cost of electronics and electrical components in the United States follows the general motions of the cost of its information, generally fossil fuel, organic gas and atomic isotopes. Recently, the only major change in the cosmetics of energy creation has been a move from fossil fuel to organic gas. Gas is considered as cleaner, and with the finding of new gas shale through the appearance of horizontally exploration technology, organic gas has experienced increased use as a feedback to power creation.

The prerecession household development growth and fast industrialization of Chinese suppliers and Indian triggered constant improves in the requirement for electrical energy. A slam up in development in the US and in Japan triggered impressive leaps in requirement for power in order to energy recently built structures. The leaps in requirement put a stress on the producers of the raw materials used to generate electrical energy, namely organic gas, fossil fuel and uranium. The costs of this information improved considerably when producers could not keep up with the rising requirement, pushing electrical energy creation organizations to pass that cost on to customers. As a result, the end cost of electrical energy improved continuously leading up to the 2008 economic problems. The cost improves were considerably less than the feedback cost improves, though, because the cost of electrical energy is affected highly by various levels of government.

]]>**Internal**

Specialised items are often specified by technological innovation professionals that are increasingly required to adhere to international and Mechanical Engineering Homework great quality requirements. Some items (e.g. exploration and metal cutting equipment) need a higher degree of reliability and performance. To manufacture these items requires strong design, analysis and growth skills, and the ability to deliver items that are tailored to satisfy particular client needs. Australia machine tool manufacturers often have advantages in the regional market by being close to clients, particularly in developing and supplying particular purpose devices and in adjusting devices for particular purposes. Efficient manufacturing processes and flexible labor contracts, as well as accessibility materials at competitive price, can website, which in turn can be passed on to clients in the form of affordable prices. Firms also contend on the reasons for superior support and after sales support. Popularity is an essential aspect in a sector covered with a handful of well-known names. Providers in key downstream marketplaces tend to be very brand faithful. Establishing and maintaining a good name for great quality and support is essential. Shipping and transport expenses are another key area of competition. Vicinity to downstream marketplaces is an essential aspect in reducing associated expenses.

**External**

Operators in the market also contest with the huge amount of imports. International organizations with plants in South-East Asia are able to achieve a price difference. The entry and expansion of big global gamers in the mechanical engineering homework has driven the competitors to improve recently, particularly in reduced value items. This has led regional gamers to focus on more specialized, higher value items designed specifically for particular marketplaces and clients. Consequently, having accessibility the most advanced technology (either through investment in analysis and growth, from huge parent organizations or by acquiring smaller niche players) has appeared as key reasons for competition in the market. Overall, exterior competitors are expected to improve over the five decades through 2013-14.

**Purchases**

Purchases represent the largest component of mechanical engineering assignment costs. Purchases are expected to decline over the five years through 2013-14, due to a decline in steel prices. This has been the result of an oversupply issue brought about by the sudden loss of demand during the financial crisis in 2008-09. Currently purchases of input materials are estimated to cost businesses 50.7% of their total revenue.

**Wages**

Wages are expected to account for 22.3% of mechanical engineering assignment revenue in 2013-14. Wage expense represents the second largest component of industry revenue. Workers are employed to manufacture, engineer and design new products. Wages are expected to decrease as a portion of revenue over the five years through 2013-14. This is in part attributed to the rationing and consolidation taken on by the industry participants.

**Depreciation**

Depreciation costs are relatively high in the industry, with the industry exhibiting a high level of capital intensity. Depreciation expenses increased over the last five years as firms invested in new capital equipment. Depreciation is currently at 5.1% of industry revenue and is forecast to increase over the coming years, as investment put off during the economic slowdown is carried out and new technology comes onto the market.

**Other**

Other key costs incurred by mechanical engineering assignment participants include research and development, transportation, interest expenses, amortisation, legal, advertising, and repairs and maintenance. These costs combined are expected to account for an estimated 11.0% of revenue in 2013-14. Research and development costs are expected to increase in the next five years as products become more specialised.

More generally, demand for machine tools is determined by price, quality, competition from imports (and fluctuations in exchange rates), as well as technological change in the industry. The age of existing equipment is another important demand determinant in the industry in Mechanical Engineering Assignment Help.

The major markets of the industry primarily consist of construction and other manufacturing industries in Mechanical Engineering Homework Help.

**Metal Product Manufacturers**

The industry’s largest market is metal product manufacturers, accounting for an estimated 20.3% of demand. Machine tools are used by this sector to manufacture parts or structures from metals. Such products include oil refineries, bridges, ships and jewellery.

**Motor Vehicle Equipment Manufacturing**

Motor vehicle equipment manufacturing is the second largest market accounting for an estimated 19.5% of the industry revenue. This also includes transport equipment manufacturing. Operators in this industry use drills, welders and moulder to construct components that are later used in the assembly of motor vehicles and other transport. This segment is expected to decline over the five years though 2013-14 due to the poor performance of the automotive industry. This is partially caused by lack of scale of domestic operators and high import competition.

**Commercial Construction**

Commercial construction is estimated to account for 16.4% of the industry revenue. Operators in this industry use machine tools and welders extensively while working on the metal structures of the buildings. This market is expected to increase slightly over the five years through 2013-14. However, this increase is in part due to the decrease of other market segments. Overall, the growth in the commercial construction segment has been only marginal over the five-year period Mechanical Engineering Homework Help.

]]>Drills and cutting machine tools

Metal working machine tool (MWMT) products are used in industries that perform cold working (cutting, bending and shaping) of metals. Examples include cutters (mechanical, plasma, oxy-fuel, water jet and laser), milling machines, grinders, presses and roll-formers. Chainsaws are also included in this product segment. The major users of MWMT products are the automotive, white goods, electrical and metal fabrication sectors. This product segment is expected to remain relatively steady as a portion of revenue over the five years through 2013-14 due to its exposure to numerous industries in Mechanical Engineering Assignment.

**Wood and Metal Working Machinery**

These products are used intensively in the construction and mining sectors, which grew significantly in recent years. This product segment is expected to increase as portion of revenue over the five years through 2013-14. This is due to in part to the decline of other product segments and the growth in the construction industry in Mechanical Engineering Homework.

Gas welding and cutting equipment

The range of products includes regulators, blowpipes, and tongue attachments, cutting nozzles and welding tips. Equipment suppliers also provide consumables. This product is expected to increase as a portion of industry revenue over the five years through 2013-14 due to its exposure to the mining sector.

**Metal Dies, Dies Sets and Molds**

These products are used to cast metal and plastic shapes, and tend to be manufactured by small operators using batch production processes. The industry is made up of a large number of small players, which are contracted by metal and plastic casting operators to produce specialised dies. The major casters include motor vehicle (and part) manufacturers, as well as casters supplying metal fabricating industries. Moulds for plastic products are primarily used by injection moulding manufacturers. This product segment is expected to fall as a portion of revenue over the five years through 2013-14 due to the decline of the automotive manufacturing.

]]>There is little regulatory control of establishments operating in this industry. There is no centralized government authority and states assume varying degrees of responsibility for regulation. In general, businesses are able to operate with considerable independence and autonomy.

Industry operators are not required to participate in accreditation programs, though some choose to in order to establish and maintain a good reputation. For example, Educate’s Sylvan Learning Center was the first supplemental education provider to earn accreditation by the Commission on International and Trans-Regional Accreditation (CITA). Accredited schools must abide by various rules and regulations, certifying that they meet standards of educational quality.

Under the No Child Left Behind Act of 2001 (NCLB), the federal government provides funding to school districts to supply free after school tutoring to low income students attending a failing school. Eligible students can seek free tutoring from a list of state approved providers of supplemental educational services (SES). Approved tutoring operators have a responsibility under the NCLB legislation to provide course content that is adequate to achieve certain educational gains and maintain confidentiality of student records. They must also report student progress to the local educational agency and to parents. In addition, instruction must be secular, neutral and non-ideological.

There have been some concerns about a lack of regulation, potential for fraud, mismanagement and aggressive marketing by tutoring firms trying to get a piece of the lucrative federally funded SES business. The state of New Jersey even had reported cases of SES providers offering signing bonuses to students. In response to the problem, the Education Industry Association drafted a code of ethics for the tutoring industry. Many tutoring companies have adopted the code. Those working in driver education training must be licensed by the relevant state government authority, whether they are employed by or own a driving school. The requirements to obtain a license vary from state to state but generally include a background check and a written examination.

Many of the services of this industry fall into the discretionary spending category and so revenue is subject to changes in the level of disposable income. Per capita disposable income increased steadily to 2007, leading to greater demand for other educational services. However, from late 2007 onward, economic slowdown and rising unemployment have eroded growth in disposable income. Consequently, the recession impacted revenue growth for operators that provide classes affected by discretionary spending, such as yoga classes. Nevertheless, an increased emphasis has been placed on scholastic education, increasing demand for tutoring and exam preparation services. Furthermore, as this industry consists of many different segments, a decline in revenue in one segment is often offset by an increase in another segment, therefore reducing the industry’s volatility. Demographic trends also underpin the industry, contributing to low volatility.

]]>obeys certain laws of motion. These laws are called Newton’s laws of motion. There are three laws of motion. These laws for linear motions and angular motions are given in the next articles.

**5.8.1. ****Newton’s Laws for Linear Motion **

**First law.** It states that a body continues in its state of rest or of uniform motion in a

straight line unless it is compelled by an external force to change that state.

**Second law**. It states that the rate of change of momentum ofa body is proportional to the external force applied on the body and takes place in the direction of the force.

**Third law**. It states that to every action, there is always an equal and opposite reaction.

Before discussing Newton’s laws of motion, let us define certain terms like mass, weight and momentum.

**1. Mass.** The quantity of matter contained in a body is known as mass of the body. Mass is a scalar quantity. In C.G.S. units, the mass is expressed in gram me (gm) whereas in S.I. units the mass is expressed in kilogramme (kg).

**2. Weight**. Weight of a body is defined as the force, by which the body is attracted

towards the centre of the earth. Mathematically weight of a body is given by

Weight = Mass × Acceleration due to gravity = Mass × g … (5.19)

If mass is taken in kilogram (kg) and acceleration due to gravity in metre per

second square (m/s^{2}), then weight is expressed in newton (N). But if mass is taken in gramme (gm) and acceleration due to gravity in centimetre per second square (cm/s^{2}), then weight is expressed in dyne. The relation between newton (N) and dyne is given as

One Newton = 10^{5} dyne.

**3. Momentum.** The product of the mass of a body and its velocity is known as momentum of the body. Momentum is a vector quantity. Mathematically, momentum is given by

Momentum = Mass × Velocity.

**5.8.2. Newton’s First Law of Motion.** It consists of two parts. First part states that a

body continues in its state of rest unless it is compelled by an external force to change that state. A book lying on a table remains at rest, unless it is lifted by some external force.

Second part states that a body continues in its state of uniform motion in a straight line unless it is compelled by an external force to change that state. In actual practice, we see that when a body is moving with a uniform velocity in a straight line, the body does not continue in its state of uniform motion but comes to rest after some time. This is due to frictional force acting on the body. For an ideal case i.e., when there is no frictional force acting on the body), the body will continue to move with uniform velocity in a straight line, unless compelled by an external force to change that state.

**5.8.3. Newton’s Second Law of Motion**. This law enables us to measure a force. Let

a body of mass ‘m’ is moving with a velocity ‘u’ along a straight line. It is acted upon by a force F and the velocity of the body becomes v in time t. Then we have

u = Initial velocity of the body,

v = Final velocity of the body,

m = Mass of the body,

a = Uniform linear acceleration,

F: Force acting on the body, which changes the velocity u to v in time t,

t: Time in second to change the velocity from u to v. Initial momentum of the body

= Mass × Initial velocity = m × u

Final momentum of the body = m × v.

Change of momentum

= Final momentum – Initial momentum = mv – mu = m(v – u)

where k is a constant of proportionality.

In equation (ii), and m (mass of a body) are constants for a given body and hence force acting on a body is proportional to the acceleration produced by the force. This means that for a given body, greater force products greater acceleration while a smaller force produces smaller acceleration. The acceleration produced will be zero if no force is applied on the body.

Two important conclusions are drawn from the first two Newton’s laws of motion:

(i) There will be no acceleration, if no external force is applied on the body. This means the body will continue in its state of existing uniform motion in a straight line.

(ii) Force applied on the body is proportional to the product of mass of the body and the acceleration produced by the force.

**5.8.4. Unit of Force.** Let us first define a ‘unit force’. A unit force can be suitably

defined so as to make the value of kin equation (ii) equal to one, A unit force (i.e., Force = 1.0) is that which produces unit acceleration on an unit mass. Then by substituting F = 1.0, m = 1.0 and a 0: 1.0 in equation (ii) (i.e., F = k × m × a), we get

1 = h × 1 × 1 or k = 1.

Substituting the value of k = 1, in equation (ii), we get

F = m × a … (5.20)

(i) If mass (m) = 1 kg and acceleration produced (a) = 1 m/s^{2} the unit of force is known as newton (which is written as N). Thus newton is defined as that force which acts on a body of mass one kg and produces an acceleration of 1 m/s^{2} in the direction of force. Newton is the unit of force in S.L system,

1 N = 1 kg × 1 m/s^{2} = 1 kg-m/s^{2},

(ii) If mass (m) 0: 1 gm and acceleration (a) 0: 1 cm/s^{2}, then unit of force is known as ‘dyne’. Thus a dyne may be defined as that force which acts on a body of mass one gm and produces an acceleration of 1 cm/s^{2}. Dyne is the unit of force in C.G.S. system.

1 dyne = 1 gm × 1 cm/s^{2} = gm cm/s^{2}

By definition,

1 N = 1 (kg) × 1 (m/s^{2}) = 1 x 1000 (gm) × 1 × 100 (cm/s^{2}) = 10^{5} (gm cm/s^{2})

= 10^{5} dyne (1 dyne = 1 gm × 1 cm/s^{2 }= gm cm/s^{2})

Note.

(i) The body will have acceleration if the external force is acting on the body in the direction of motion of the body.

(ii) The body will have retardation if the external force is acting opposite to the direction of motion of the body.

**Problem 5.36**. *A force of unknown magnitude acts on a body of mass 150 kg and produces **an **acceleration of **3 **m / s ^{2} *

**Sol.** Given:

Mass of the body, m = 150 kg

Acceleration, f = 3 m/s^{2}

The force is given by equation (5.20),

Hence F = m × a = 150 (kg) × 3 (m/s^{2})

= 450 (kg-m/s^{2}) =** ****450 N. Ans.** (kg-m/s^{2}= N)

**Problem 5.37**. *A force of 100 N acts on a body having a mass of **4 **kg for 10 seconds. If the initial velocity of the body is **5 **m/**s, determine: *

*(i) **acceleration produced in the direction of force, and *

*(ii) **distance moved by the body ill 10 seconds, *

**Sol.** Given:

Force, F = 100 N ;

Mass, m = 4 kg

Time, t = 10 second;

Initial velocity, u = 5 m/s

Let a = Acceleration produced in the direction of force

s = Distance travelled by body in 10 seconds.

(i) Using equation (5.20), we get

F=m × a or 100 = 4 × a

**Problem 5.38.** *The weight of a body on earth is 980 N. If the acceleration due to gravity on earth **= **9.80 m**/s*^{2}*, **what will be weight of the body on: *

*(i) **the moon, where gravitational acceleration is **1.6 m**/**s ^{2}, *

*(ii) **the sun, where gravitational acceleration is 270 m**/**s ^{2}. *

**Sol.** Given:

Weight of body on earth, W = 980 N

Acceleration due to gravity on earth, g = 9.80 m/s^{2}.

First calculate the mass of the body on earth. Using equation (5.19), we have

Weight = Mass × g or 980 = Mass × 9.80

The mass of the body will remain the same on moon as well as on sun.

(i) Weight of the body on moon, where g = 1.6 m/s^{2}

Using equation (5.19),

Weight = Mass × g =100 × 1.6 = **160 ****N. Ans.**

(ii) Weight of the body on sun, where g = 270 m/s^{2 }

Weight = Mass × g = 100 x 270 = **27000 ****N. Ans.**

**Problem 5.39**.* **A **force of 200 **N **acts on a body having mass of 300 kg for 90 seconds. If the initial velocity of the body is 20 m/s, determine the final velocity of the body: *

(i) *when the force acts in the direction of motion, and *

(ii) *when the force acts in the opposite direction of the motion. *

**Sol**. Given:

Force, F = 200 N

Mass, m = 300 kg

Time, t = 90 seconds

Initial velocity, u = 20 m/s.

Using equation (5.20), we have

F = m × a or 200 = 300 × a

(- ve sign shows that the body will be moving in the opposite direction).

**Problem 5.40**. *A body of mass **15 kg falls on the ground from a height of 19.6 m. The
body penetrates into the ground. Find the distance through which the body will penetrate into ·the ground, if the resistance by the ground to penetration is constant and equal to 4900 N. Take *

**Sol**. Given:

Mass, m = 15 kg

Height of body from ground, h = 19.6 m

Resistance to penetration, F* = 4900 N

Acceleration due to gravity, g = 9.8 m/s^{2}.

Let us first consider the motion of the body from a height of 19.6 m to the ground surface.

Initial velocity of the body, u = 0

Final velocity of the body, when it reaches the ground = v.

Using the equation,

When the body is penetrating into the ground, the resistance to penetration is acting in the upward direction (Resistance always acts in the opposite direction of motion of the body). But the weight of the body is acting in the downward direction.

Weight of the body is given by equation (5.19),

Weight of the body = Mass × g = 15 × 9.80 N = 147 N

Upward resistance to penetration = 4900 N

Net force acting in the upward direction,

F = 4900 – 147 = 4753 N.

As the net force on the body is acting in the opposite direction to the motion of the body, this force will produce retardation.

Using equation (5.20), we have

Distance through which body will penetrate into the ground.

Consider the motion of the body from the ground to the point of penetration into the ground.

Let the distance of penetration = s

Final velocity, v = 0

Initial velocity, u = Velocity of the body on the ground == 19.6 m/s

Retardation, a == 316.866 m/s^{2}.

Using the relation,

v^{2} – u^{2} = – 20a × s ( -ve sign is taken due to retardation)

**Problem ****5.41**. *A man weighing **637 **N dives into a swimming pool from a tower of
height *

(AMIE Summer, 1982)

**Sol.** Given:

Weight of the man = 637 N

Height of tower, h = 19.6 m

Distance travelled by man from the water surface into the water = 2 m.

First consider the motion of the man from the top of the tower to the water surface of the swimming pool.

Initial velocity of man, u. = 0

Acceleration due to gravity, g = 9.8 m/s^{2}.

Let the final velocity of the man, when he reaches the water surface = v.

Now using the relation,

v^{2} – u^{2} = 2gh or v^{2} – 0^{2} = 2 × 9.80 × 19.60

Now consider the motion of the man from the water surface of the swimming pool upto the point, from where the man started rising.

Distance traversed, s = 2 m

Initial velocity of the man on the water surface

u = 19.6m/s

Final velocity, v = 0.

As the velocity of the man becomes zero after travelling a distance 2 m inside the water, hence a force due to water resistance is acting in the opposite direction to the motion of the man. This force will produce retardation.

Let a = Retardation due to water resistance

Using the relation, v^{2} – u^{2} = – 2as (- ve sign is taken due to retardation)

0^{2} – 19.6^{2} = – 2 × a × 2

**Average resistance of water **

Let F* = Average resistance of water acting on the man in the upward direction.

Weight of man = 637 N acting in the downward direction.

Net force acting on the man in the upward direction

= F* – Weight of man = (F* – 637) N.

But the net force acting on the man must be equal to the product of mass of the man and retardation.

(F* – 637) = m × a (F = m × a) … (i)

But mass of man,

Substituting the values of m and a in equation (i), we get

(F* – 637) = 65 × 96.04

F* = 65 × 96.04 + 637

= **6879.6 ****N. Ans. **

**Problem ****5.42**. *A bullet of mass 81 gm and moving with a velocity of 300 m l **s **is fired
into *

(AMIE Winter, 1981)

**Sol.** Given:

Initial velocity of bullet, u = 300 m/s

Distance travelled, s = 10 cm = 0.10 m

Final velocity, v = 0.

As the force of resistance is acting in the opposite direction of motion of bullet, hence force of resistance will produce retardation on the bullet.

Let a = Retardation

Now using the relation,

v^{2}-u^{2} =-20s (- ve sign is taken due to retardation)

0^{2} – 300^{2} = – 2 × a × 0.1

Let F = Force of resistance offered by wood to the bullet.

Using equation (5.20), we get

F* = m × a = .081 × 450000

= **36450 ****N. Ans . **

Velocity of the bullet with which the bullet will come out from a piece of wood of 5 cm thick.

Let v = velocity with which the bullet emerges from the piece of wood of 5 cm thick.

Initial velocity, u = 300 m/s.

As the resistance offered by wood is uniform, hence retardation will be same as before.

a = 450000 m/s^{2}.

Distance travelled, r = 5 cm = .05 m

Using the relation,

v^{2}- u^{2} = – 2as (- ve sign is taken due to retardation)

v^{2} – 300^{2} = – 2 × 450000 × .05 or v^{2} = 300 × 300 – 45000

= 90000 – 45000 = 45000

**Problem 5.43**. *A car, moving on a straight level road, skidded for a total distance of’
*

**Sol.** Given:

Let u = Velocity of car just before applying the brakes.

Final velocity of car, v = 0

Distance travelled, s = 60 m

Co-efficient of friction between car tyres and road,

µ = 0.4

Let W = Weight of car in Newton

R = Normal reaction

= 0.4 W Newton

F=0.4 W.

As frictional force is acting in the opposite direction of motion , hence the frictional force will produce retardation.

Using equation (5.20),

Force = Mass × a

**Problem 5.43**. *A car, moving on a straight level road, skidded for a total distance of’
*

**Sol.** Given:

Let u = Velocity of car just before applying the brakes.

Final velocity of car, v = 0

Distance travelled, s = 60 m

Co-efficient of friction between car tyres and road,

µ = 0.4

Let W = Weight of car in Newton

R = Normal reaction

Fig. 5.17

**1st Case.** Fig. 5.17 shows the position of the truck, when it is moving down the plane. The road resistance (F_{1}) is acting in the opposite direction of the motion of the truck. The truck is not having any acceleration and hence it is moving with a constant velocity of 10 m/s. Hence the net force on the truck in the direction of motion should be zero. But net force on the truck in the direction of motion (See Fig. 5.17).

= W sin θ – F_{1}

Distance CD = s = 39.12 m.

(ii) Will the car stop at D or move again down the grade?

After reaching point D, the car will move down the grade if the component of the weight of the car along the grade is more than the force of friction due to track. The force of friction along the grade is acting up the plane whereas the component of the weight of the car along the grade is acting down the plane.

But force of friction = 160 N

and component of the weight of the car along the grade = 1000 N.

As the component of the weight of the car along the grade is more than the force of friction, the car will move down from D. **Ans.**

(iii) Distance travelled by car from B to E on level track while moving down the grade.

First consider the motion from point D to point B.

Initial velocity at D, u = 0

Final velocity at B = v (assumed)

Distance BD, s = Distance CD + Distance BC

= 39.12 + 100 = 139.12 m

Let a = Acceleration when car is moving from D to B.

When the car is moving down from D to B, the frictional resistance of 160 N is acting

upward while the component of the weight of the car along the grade is acting downward. Hence the net downward force along the grade which produces acceleration a’ is (1000 N – 160 N) or 840 N.

Net force down the grade = 840 N.

Now using the relation, Force = Mass × Acceleration

Consider the motion from B to E

Now, from B to E the track is level. The weight of the car is acting vertically downward. The component of the weight of the car along the horizontal plane is zero. The only force acting on the car, when it is moving from B to E, is frictional force. This frictional force of 160 N will oppose the motion of the car and finally the car will stop to E. The frictional force will produce retardation.

Let a* = Retardation from B to E

Force = Mass × Retardation

a = Uniform acceleration of the lift

T = Tension in cable supporting the lift. This is also called the *reaction of the lift.

The lift may be moving Upwards or moving downwards.

*Reaction of lift is equal to the tension (1′) in cable supporting the lift.

**1st Case.** Let the lift is moving upwards as shown in Fig. 5.22 (a). The weight carried by lift is acting downwards while the tension in the cable is acting upwards. As the lift is moving up, the net force which is equal to (T – W) is acting upwards.

Fig. 5.22 (a) Lift is moving upwards

Net force in upward direction = T – W.

This net force produces an acceleration ‘a’

Hence using,

Net force = Mass × Acceleration

**2nd Case.** As the lift is moving downwards as shown in Fig. 5.22 (b), the net force is acting downwards. Hence in this case W is more than T (tension in string).

Net force in downward direction = (W – T).

This net force produces an acceleration ‘a’,

Hence using, Net force = Mass × Acceleration

Fig. 5.22. (b) Lift is moving

**Problem 5.51***. A lift carries a weight of 100 N and is moving with a uniform acceleration of 2.45 **m/s*^{2}*. **Determine the tension in the cables supporting the lift, when: *

(i) *lift is moving upwards, and *

(ii) *lift is moving downwards. Take g **= **9.80 **m/s ^{2}. *

**Sol.** Given:

Weight carried by lift, W = 100 N.

Uniform acceleration, a = 2.45 m/s^{2}.

(i) Lift is moving upwards

Let T = Tension in the cables supporting the lift.

= 100 × .75 =** ****75 N. Ans. **

**Problem 5.52**. A life has an upward acceleration of 1.225 m / s^{2}. What pressure will a

man weighing 500 N exert on the floor of the lift? What pressure would he exert if the lift had an acceleration of 1.225 m/s^{2} downwards? What upward acceleration would cause his weight to exert a pressure of 600 N on the floor? Take g = 9.8 m/s^{2}.

**Sol**. Given:

Upward acceleration, a = l.225 m/s^{2}

Weight of man, W = 500 N.

**1st ****Case.** The lift is moving up with an acceleration of l.225 m/s^{2}. The pressure exerted by a man on the floor of the lift is equal to the reaction of the lift and it is the same as the tension in the cables supporting the lift.

Let T = Tension in the cables supporting the lift or the reaction of the lift or the pressure exerted by the man on the floor of the lift.

Using equation (5.23)for the lift moving upwards, we have

**2nd Case.** The lift is moving downwards with an acceleration of 1.225 m/s^{2}. The pressure exerted by the man on the floor of the lift is equal to the reaction of the lift and it is the same as the tension in the cables supporting the lift.

Using equation (5.24),

**3rd Case**. The lift is moving upwards with an unknown acceleration.

Let a = Acceleration upwards

T = Pressure exerted by man on floor of lift = 600 N

W = Weight of man = 500 N.

Using equation (5.23), we get

or a = (1.2 – 1.0) × 9.80 = 0.2 × 9.80 = **1.96 m/s ^{2}. Ans. **

**Problem 5.53***. An elevator weighs 2500 N and is moving vertically downwards with a constant acceleration. Write the equation for the elevator cable tension. Starting from rest it travels a distance of **35 **metres during an interval of 10 seconds. Find the cable tension during this time. Neglect all other resistances to motion. What are the limits of cable tension? *

(AMIE Summer, 1979)

**Sol**. Given:

Weight of elevator, W = 2500 N

Initial velocity, u = 0

Distance travelled = 35 m

Time, t = 10 sec.

Let T = Tension in the cable supporting an elevator in N.

**1st Part**. The equation for the elevator cable tension is obtained as given below: (see Fig. 5.23). The elevator is moving down.

Net acceleration force in the downward direction

= (W – T) = (2500 – T) N.

The net accelerating force produces an acceleration ‘a’ in the downward direction.

Hence using the relation,

Net force = Mass × Acceleration.

Fig. 5.23

Hence the above equation (i) represents the equation for the elevator cable tension when the elevator is moving downwards.

**2nd Part.** Limits of cable tension are obtained from equation (i) as given below:

(i) When a = 0, and this value is substituted in equation (r), the value of T is obtained as

Limits of cable tension (T) are:

At a = 0, T = 2500 N

At a = 9.81, T = 0**. Ans. **

**3rd Part.** s = 35 m, u = 0 and· t = 10 seconds.

**Problem 5.54***.A cage, carrying 10 men each weighing 500 N, starts moving downwards from rest in a mine vertical shaft. The cage attains a speed of **12 metres/s in 20 metres. Find the pressure exerted by each man on the floor of the cage. Take g **= **9.80 m**/s*^{2}*. *

**Sol.** Given:

Weight of one man, = 500 N

Total weight of 10 men on the cage, W = 500 × 10 = 5000 N

Initial velocity of cage, u = 0

Final velocity of cage, v = 12 m/s

Distance travelled, s = 20 m

Acceleration due to gravity, g = 9.80 m/s^{2}.

The pressure exerted by the man on the floor of the cage will be same as the tension produced in the cables supporting the cage.

Let T = Total tension produced by 10 men in the cables.

a = Acceleration of the cage.

The acceleration will be obtained by using the relation,

v^{2 }- u^{2}=2as or 12^{2 }- 0=2a × 20

But tension produced by each man in the cable is the same as the pressure exerted by each man on the floor of the cage.

Pressure exerted by each man on the floor = **316.326 N. Ans.**

**Problem 5.55***. An elevator weighing 500’0 N is ascending with an acceleration of
3 m/s*

(AMIE Summer, 1982)

**Sol**. Given:

Weight of the elevator, W_{1} = 5000 N

Acceleration of elevator, a = 3 m/s^{2}

Weight of the operator, W_{2} = 700 N

When the operator is standing on the scale, placed on the floor of the elevator, the reading of the scale will be equal to the reaction (R) offered by the floor on the

operator.

Hence let R = Reaction offered by floor on operator. This is also equal to the reading of scale.

T = Total tension in the cables of elevator.

Consider the motion of operator. The operator is moving upwards along with the elevator with an acceleration a = 3 m/s^{2}. The net force on the operator is acting upwards.

Fig. 5.24

Net upward force on operator

= Reaction offered by floor on operator – Weight of operator

= (R -700)

Total tension in the cables of elevator.

Let T = Total tension in the cables of elevator

W = Total weight (i.e., weight of elevator + weight of operator)

= 5000 + 700 = 5700 N.

As the elevator with the operator is moving upwards with an acceleration f = 3 m/s^{2}, the net force will be acting on the elevator and operator in the upward direction.

Net upward force on elevator and operator,

= Total tension in the cables – Total weight of elevator and operator

= (T-5700)

Mass of elevator and operator

**5.8.8. Analysis of the Motion of Two Bodies Connected by a String**. Fig. 5.25 shows a light and inextensible string passing over a smooth and weightless pulley. Two bodies of weights W_{1} and W_{2} are attached to the two ends of the string. Let W_{1} be greater than W_{2}. As W_{1} > W_{2}, the weight W_{1} will move downwards, whereas the smaller weight (W_{2}) will move upwards. For an inextensible string, the upward acceleration of the weight W_{2} will be equal to the downward acceleration of the weight W_{1}

As the string is light and inextensible and passing over a smooth pulley, the tension* of the string will be the same on both sides of the pulley.

Let T = Tension in both strings,

a = Acceleration of the bodies.

Fig.5.25

*Tension of the string on both sides of the pulley will be different if the string is heavy i.e., weight of string is considered), extensible and does not pass over a smooth pulley.

Consider the motion of weight, W_{1.} The weight W_{1} is moving downwards with an acceleration a. The forces acting on W_{1} are (i) its weight W_{1} acting downwards and (ii) tension T acting upwards. As the weight W_{1} is moving downwards, hence net force on the weight W_{1} is acting downwards.

Net downward force = (W_{1} – T)

But net force = Mass × Acceleration

Now consider the motion of weight, W_{2}· The forces acting on W_{2} are: (i) its weight W_{2} acting downwards and (ii) tension T acting upwards. But the weight W_{2} is moving upwards, hence net force on weight W_{2}, is acting upwards.

Net upward force = (T – W_{2})

But net upward force = Mass × Acceleration

**Problem ****5.56**. *Two bodies of weight **50 **N and **30 **N are connected to the two ends of a light inextensible string. The string **is passing over a smooth pulley, Determine: *

*(i) **The acceleration of the system, and *

*(ii) **Tension in the string. Take g **= **9.80 **m**/s*^{2}*. *

**Sol** Given:

Heavier weight, W_{1} = 50 N

Lighter weight, W_{2} = 30 N

Let a = Acceleration of the system, and

T = Tension in the string.

Fig. 5.26

(i) Using the equation (5.25) for acceleration,

**= ****2.45 m/s ^{2} Ans.**

(ii) Using equation (5.26) for tension in the string,

**Problem ****5.57**. *Two bodies of different weights are connected to the two ends of a light inextensible string, which passes over a smooth pulley. If the acceleration of the system is **3 m**/s ^{2} and bigger weight is *

*(i) **The smaller weight, and *

*(ii) **Tension in the string. Take g **= **9.80 m**/**s ^{2}. *

**Sol.** Given:

Acceleration, a = 3 m/s^{2}

Bigger weight, W_{1} = 60 N

Let W_{2} = Smaller weight, and

T = Tension in the string.

(i) Using equation (5.25); we get

**Problem ****5.58**.* **A **pulley whose axis passes through the centre **O, **carries load as
shown in Fig. *

(AMIE Summer, 1981)

**Sol**. Given:

Bigger load, W_{1} = 700 N

Smaller load, W_{2} = 500 N

Let a = Acceleration of block A or the acceleration of the system.

Using equation (5.25),

How much weight should be added to or taken away from the block A (i.e., from bigger load 700 N) when acceleration of bigger load is g / 3.0 downwards.

Let W1* = Total weight of block A when acceleration is g/3.0

As W1* is more than W_{1}. Hence the weight must be added to the block A.

Weight added = W1* – W_{1} = 1000 – 700 = **300 N. Ans. **

**Problem 5.59***. Determine the tensions in the strings and accelerations of blocks A and B weighing **150 **N and **50 **N connected by a string and a frictionless and weightless pulley as shown in Fig. **5.28.*

(AMIE Nov., 1970)

**Sol.** Given:

Weight of block A = 150 N

Weight of block B = 50 N.

As the pulley is smooth, the tension in the string will be same throughout.

Let T = Tension in the string

a = Acceleration of block B.

Then acceleration of block A will be equal to half the acceleration of block B.

As the weight of block A is more than the weight of block B, the block A will move downwards whereas the block B will move upwards.

Fig, 5.28

Consider the motion of block B

The forces acting on block B are: (i) its weight 50 N acting downwards, and (ii) tension T acting upwards. As the block B is moving upwards, the net force on the block B is acting upwards.

Net force on block B = T – 50

Acceleration of block B = a.

But, Net force = Mass × Acceleration

]]>